IVA Test – Passed!

I received email confirmation that I could book my IVA test so I phoned up, only to be told that the next available test in Kidderminster was 28th of August! As I had a finished car, I asked for alternatives and was given Friday 15th of July (about a week after the date I phoned) in Derby. This meant about a 70 mile drive rather than 40 miles, but worth it to get the earlier test.

So after final checks, aligning the headlights and calibrating the speedo, the car was ready for the IVA test.

DSC_0106

 

DSC_0100

On the 15th of July at 4am, my Dad turned up at my house with his Discovery and a trailer to tow the Westfield when it inevitably broke down. However the Westfield ran fine and at about 6am, we reached Derby and stopped at the Mcdonald’s down the road from the test centre.

The only problem I found on the way there was that the speed sensor was not picking up. This was a problem I had found on the driveway and found it difficult to pick up the speed correctly whilst preventing the sensor from rubbing on the propshaft. I did a few laps of the McDonalds car park and adjusted the sensor until it worked.

DSC_0112

After breakfast, we drove to fill up with petrol and then to the test centre. I arrived early and started to get nervous that I was in the wrong place, until just before 8am when the roller door was opened by Roy the tester and his apprentice.

DSC_0117

The test is conducted in the long building, moving the car forwards for each new test. There were a few minor problems such as sharp edges that I was allowed to cover as we went along. The ones I can think of were the ECU plate edges and the front shock pre load adjusters which had to be covered.

DSC_0118

The emissions test went surprisingly well with no cat, and I got a receipt showing 0.59% CO vs a target of 3.5%

DSC_0124

The other tests included things such as speedo calibration, light function and alignment, seat belts, steering lock, checking pipes and suspension, fuel filler locking and tethering, sharp edges, brakes etc.

They took lots of measurements shown below which will be used in the application for a registration number. Total weight with a tank of fuel but no passengers was 610kg.

DSC_0122

At the end of the test, the tester went away to make some calculations as I covered the final sharp edge, and when he came back he presented me with an Individual Approval Certificate as the car had passed!

DSC_0120

We packed everything up and then drove home again. The car had completed 140 miles with no major problems and passed the test so I was very happy with a successful day! Thanks to my dad for carrying tools and towing an empty trailer across the country. The most surprising thing was that I had driven 140 miles in a bright green car, with a crash helmet and no number plates and had been pulled over by the police exactly 0 times.

Since getting the car home, I have now put the other wheels and tyres on and sent off my application for an application form for road registration… Hopefully in a few weeks it will all be sorted and on the road.

DSC_0148

IVA Preparation

My first IVA application got lost in the post and delayed things by 3 weeks, but everything is ready and the IVA test is booked… for Friday!

When I got a confirmation email through, I was asked to phone and book a date. The closest free slot at Kidderminster (closest station) was the end of August, so I asked if there were any alternatives and Derby had free slots Friday and Wednesday / tomorrow (but I need to be in work).

This is therefore a quick update of everything before the IVA.

Dashboard tidied up and holes made for the switches

DSC_1508  DSC_1510

Wiring tidied up and clipped down

DSC_1512

Setting the geometry up (this is much more difficult in a single garage compared to how it was in Formula Student!

DSC_1517

Brake fluid identification sticker added:

DSC_1521

The steering column has a bit of wobble in it due to the bushing fit on the column. I therefore bought a roller bearing and have fitted this. The wobble has completely gone and the steering is even more free.

DSC_1522   DSC_1524

I have also bought a second sump from Ebay to get it cut down, to improve the ride height (sump is currently the lowest part and scrapes on the join between my garage and driveway). I had planned to do this after the IVA but due to various delays, this seemed like a good time. I will fit the modified sump after the IVA.

DSC_1525  DSC_1527 DSC_1536

Due to the way I have wired the fog and hazard switches in, I had to redo them and pass the wiring through the dashboard.

DSC_1550  DSC_1558

Checked and tidied the rear end, including wiring and thread engagement, before putting the boot cover on.

DSC_1560  DSC_1563DSC_1564  DSC_1566DSC_1568

After this, it has been a case of checking everything over, covering sharp edges and nuts, putting split pins in place and testing the car up and down the driveway.

DSC_0028

DSC_0023

DSC_0097

Everything on the car is now ready for Friday, I just need to pack tools, spares and the paperwork.